Doha BIM-logo-22 july 20.png
Doha BIM Consultancy

Consulting solutions & results

  • Home

  • Services

    • BIM Implementation & Adoption
    • BIM Management
    • BIM Modeling
    • Developement of a new Product
    • Training
    • BIM Facility Management Services
  • About Us

  • Blog

  • Contact

  • Forum

  • More

    Use tab to navigate through the menu items.
    To see this working, head to your live site.
    • All Posts
    • My Posts
    ricky stevens
    Oct 25, 2021

    How do I Fix HP Laserjet 1320 error light ?

    in General Discussions

    Learn the quick ad east to follow steps to fix the on your HP printing device. Make sure you check the internet connection before you try to fix the issues. If your wireless status blinks slowly and the strength indicator channels through the signal bar, this clearly refers to a situation where the printer is looking for a wireless connection.

    The correct procedure for a cold reset is to turn the printer off.

    1. Turn the printer off.

    2. Press and hold down the GO button.

    3. Turn the printer on, and continue to hold the GO button for at least 20 seconds. During. this process, the GO button, Attention, and Ready LEDs each turn on.

    4. Release the GO button.

    1 comment
    0
    Jake Paul
    Nov 02, 2021

    How do you reset your printer settings?

    Follow the steps listed below to reset the print settings to the original factory default settings.

    1. Press the Menu/Set key on the control panel.

    2. Press up or down navigation key to select Printer and press Menu/Set.

    3. Press up or down navigation key to select Reset Printer and press Menu/Set.

    4. Press 1 to select “Yes”.

    Where are my printer settings?

    Access the settings window in Devices and Printers to select settings that apply to all your print jobs.

    1. Search Windows for ‘printers’, then click Devices and Printers in the search results.

    2. Right-click the icon for your printer, then click Printer properties.

    3. Click the Advanced tab, then click Printing Defaults.

    Where are Windows printer settings?

    Every printer stores all of it’s settings in the DEVMODE structure and stores the DEVMODE structure in the registry. The DEVMODE structure consists of a standard section and a printer specific section.

    How do I change HP printer settings?

    Follow these steps to change your printer’s default settings:

    1. Type “Devices” into the main search bar at the bottom left of your screen.

    2. Select “Devices and Printers” from the results list.

    3. Right click on the appropriate printer icon.

    4. Select “Printing Preferences”

    5. Change print settings, click “OK”

    6. Ready, set, print!

    0
    1 comments

    +00 974 55934428

    ©2018 by Doha BIM Consultancy